Bursting Strength Test Materials

​A selection of plain, reinforced and low pressure diaphragms and verification foils. A range to test different pressures (including low pressure diaphragms) and to meet retailers' requirements (M&S P27 and Adidas)

Enquire

Diaphragms are used for testing on TruBurst, underneath the sample they inflate to apply the correct pressure. Foils have a reliable, standardised burst strength and are used to verify a machine in between calibration visits.

​Quality assured - tested in our lab

​Variety and flexibility - test different pressures

Locally available & hassle-free delivery

Standards

  • ASTM D3786
  • ISO 13938-2
  • M&S P27
  • NEXT TM 22
  • WSP 30.2
  • Woolmark TM29
  • adidas® Group 4.09

Sizes


  • 1mm thick - Per pack (10)
  • 1.5mm thick - Per pack (10)
  • M&S P27 & Adidas 4.09 1mm thick - Per pack (10)
  • 0.2mm thick - Per pack (10)
  • For 50cm2 Dome - 60-140kPa - Per pack (5)
  • For 50cm2 Dome - 140-260kPa - Per pack (5)
  • For 50cm2 Dome - 280-410kPa - Per pack (5)
  • For 50cm2 Dome - 450-550kPa - Per pack (5)
  • For 50cm2 Dome - 560-700kPa - Per pack (5)
  • For 50cm2 Dome - 750-920kPa - Per pack (5)
  • For 7.3cm2 Dome - 160-270kPa - Per pack (5)
  • For 50cm2 Dome - 260-370kPa - Per pack (5)
  • For 50cm2 Dome - 370-480kPa - Per pack (5)
  • For 50cm2 Dome - 480-620kPa - Per pack (5)

Pair these with TruBurst, Pneumatic Bursting Strength Tester for a range of bursting strength and fatigue tests suitable for knitted textiles, medical textiles, non-wovens, paper and plastics

Peter Goodwin - Head of Technical

We don't compromise on quality, so we choose the best equipment and test materials for our laboratory. We know we can rely on James Heal for support & advice

R&D Testing Laboratory (USA)